Description
You know you're holding a serious piece of sound equipment when you feel the heft of a JX amp. JL Audio designed these amplifiers with sturdy, high-grade parts that ensure excellent heat management, provide high current flow, and deliver stable performance in almost any situation. You won't find blinking lights or meters on the outside of these amps, but you will find oversized output transistors and rugged MOSFET power supplies inside. The sleek, high-mass aluminium heatsink keeps things cool enough to virtually eliminate thermal shut-downs.
The JX360/2 2-channel amp puts out 110 watts RMS per channel to your speaker system, a great match for a high-quality set of component speakers — or you can switch over to mono mode to send 360 watts RMS to a sub. You can use the high- and low-pass frequency filters to make your speaker system sound its absolute best. The amp includes speaker-level inputs, along with preamp inputs and outputs, so it's ready to work in virtually any system.
- Class A/B Two-Channel Full-Range Amplifier
- Inputs: One Stereo Pair (RCA Low-Level or Multi-Pin High-Level)
- On-board Crossover: 12dB/octave High-Pass or Low-Pass with continuously variable cutoff frequency selection from 50 - 200 Hz. Defeatable
- Preamp Output: Pass-through with RCA-type jacks
- Rated Power 14.4 V Stereo:
- 110W x 2 @ 4 ohm
- 180W x 2 @ 2 ohm
- Rated Power 14.4 V Bridged :
- 360W x 1 @ 4 ohm
- Rated Power 12.5 V Stereo:
- 90W RMS x 2 @ 4 ohms
- 140W RMS x 2 @ 2 ohms
- Rated Power 12.5 V Bridged:
- 280W RMS x 1 @ 4 ohms
- THD at Rated Power: 1% @ 4 ohms
- Frequency Response:
- 20 Hz - 20 kHz +/- 1 dB
- Input Range:
- 200mV - 4V (Low-Level)
- 2V - 10V (High-Level)
- Dimensions (L x W x H):
- 12.80" x 7.68" x 2.15" (325 mm x 199 mm x 55 mm)
Installation
Mobile Electronics professionally installed
With over 30 years experience in our industry we pride ourselves on our product knowledge and our technical knowledge in terms of installation and advice. If you feel that you would like to have your purchase professionally installed by one of our fully qualified engineers, this can be arranged at your home or your work place anywhere throughout the UK.
Being members of MESF, FITAS, Thatcham and The Safe Contractor Scheme have enabled Autosounds to develop our workforce and maintain the necessary standards to carry out installations for our customers whether you are a business or a consumer.
Arrange an Installation
Arranging an installation couldn't be easier. Simply call us on 0191 2736100 or email bookings@autosounds.co.uk
From here we will take all the pre-booking information that we need. With this information to hand, we will call our engineers who cover your post-code and see what dates and times they are available to carry out your installation.
We have between 2 and 5 engineers for every post-code so we can ensure a quick turn around.
Once we have all the possible installation times, we will call you back and see which suites your needs the most & make the booking, payment for the product and installation can be done on our secure website.
The installer will then arrive at your home or work place with his tools and install your equipment within a couple of hours and then demonstrate how to use it.
- Installation at Your Home or Workplace Mon to Fri - 9am to 5.30pm
- Highly Competitive Prices for a Fully Professional, Insured Service!
- Full Product Demonstration After Installation
- Vastly experienced in dealing with prestige vehicles, including Aston Martin, Porsche, Ferrari and more
- Trade Service Available for Fleets of All Sizes
