Description
The Alpine X-Power MRX-M100 uses much of the same digital technology as the PDX series, achieving high efficiency with excellent audio performance, including low distortion, high damping factor and high S/N ratio. PDX digital technology means high efficiency, so the X-Power amps are up to 29% more compact than previous models, making installation even more convenient.
Speaker Level Inputs let you connect these amps directly to factory-installed head units that do not have preamp outputs, so you can upgrade the original system with higher power and better speakers. The remote sensing function turns the power on automatically when the amp detects an incoming audio signal. There is no more need for an extra remote line.
These digital powerhouses are so efficient, they’re much more compact than you expect. Advanced thermal protection means you can play them loud and the music never stops.
- 1200W Max Power
- 4 x 50W RMS @ 4ohms + 1 x 300W @ 2ohms
- Class-D (Digital)
- Thermal Management Control
Power Output Ratings
- Max Power: 1200W
- RMS Per Channel into 4ohms, 14.4V (=1%THD+N): 4 x 50W + 200W
- RMS Per Channel into 2ohms, 14.4V (=1%THD+N): 4 x 75W + 300W
- RMS Bridged into 4ohms, 14.4V (=1%THD+N): 2 x 150W
Sound Tuning
- Crossover Frequency (LPF): 50 - 400Hz (-12dB/oct.) for Subwoofer
- Crossover Frequency (HPF): 50 - 400Hz (-12dB/oct.) for CH-1/2/3/4
- EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
- Subsonic: OFF / 5 - 30Hz (-24dB/oct.)
Dimensions
- Heat Sink: 210 x 58 x 230 mm
- Footprint: 270 x 58 x 230 mm
General
- Amplifier Type: Class-D (Digital)
- Channel Design: 4 Channel + Subwoofer
- Thermal Control: Thermal Management Control
- Power Supply: MOSFET
- Power Supply Design: DC-DC PWM Power Supply
- Board Circuitry: S.T.A.R. Circuitry
- Current Protection: Over-Current, Over-Voltage and Thermal Protection
- Power Indicator: Top Mounted Blue LED Power Indicator
- 4-Channel Speaker Level Input
- Crossover: Variable Lowpass & Highpass Filter
- Built-in Bass EQ
- Built-in Subsonic Filter
- Final Outputs: Direct FET
- Board Design: 6-layer Glass Epoxy PC Board
- Continuously Adjustable Gain Control
- Remote Bass Control ( RUX-KNOB sold separately )
- Power Requirements: 14.4V DC (11 - 16V)
- Input Sensitivity (RCA Input): 0.2 - 4.0V
- Input Sensitivity (Speaker Level Input): 0.5 - 10V
- Input Impedance:10k ohms
- Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 5Hz - 45kHz
- Frequency Response (+0, -3dB: 1W into 4 ohms) for Subwoofer: 5 - 400Hz
- Frequency Response (+0, -1dB: 1W into 4 ohms) for CH-1/2/3/4: 7Hz - 30kHz
- Frequency Response (+0, -1dB: 1W into 4 ohms) for Subwoofer: 10Hz - 300Hz
- THD+N (10W into 4 ohms) for CH-1/2/3/4: 0.02%
- THD+N (10W into 4 ohms) for Subwoofer: 0.008%
- THD+N (Rated Power into 4 ohms) for CH-1/2/3/4: 0.07%
- THD+N (Rated Power into 4 ohms) for Subwoofer: 0.04%
- Damping Factor for CH-1/2/3/4:500
- Damping Factor for Subwoofer:1000
- Signal to Noise (Rated Power into 4 ohms) for CH-1/2/3/4: 103dB
- Signal to Noise (Rated Power into 4 ohms) for Subwoofer: 107dB
- Remote Level: 0 to -20dB ( RUX-KNOB Required )
Installation
Mobile Electronics professionally installed
With over 30 years experience in our industry we pride ourselves on our product knowledge and our technical knowledge in terms of installation and advice. If you feel that you would like to have your purchase professionally installed by one of our fully qualified engineers, this can be arranged at your home or your work place anywhere throughout the UK.
Being members of MESF, FITAS, Thatcham and The Safe Contractor Scheme have enabled Autosounds to develop our workforce and maintain the necessary standards to carry out installations for our customers whether you are a business or a consumer.
Arrange an Installation
Arranging an installation couldn't be easier. Simply call us on 0191 2736100 or email bookings@autosounds.co.uk
From here we will take all the pre-booking information that we need. With this information to hand, we will call our engineers who cover your post-code and see what dates and times they are available to carry out your installation.
We have between 2 and 5 engineers for every post-code so we can ensure a quick turn around.
Once we have all the possible installation times, we will call you back and see which suites your needs the most & make the booking, payment for the product and installation can be done on our secure website.
The installer will then arrive at your home or work place with his tools and install your equipment within a couple of hours and then demonstrate how to use it.
- Installation at Your Home or Workplace Mon to Fri - 9am to 5.30pm
- Highly Competitive Prices for a Fully Professional, Insured Service!
- Full Product Demonstration After Installation
- Vastly experienced in dealing with prestige vehicles, including Aston Martin, Porsche, Ferrari and more
- Trade Service Available for Fleets of All Sizes
